Ultra heavy duty 12V/24V DC jump start pack built into a steel case and designed for the multi-starting of large commercial vehicles and plant up to 18 litres, and all 12V vehicles.
The premium Nato range of 12V/24V jump start packs have been designed for the multi-starting of large commercial engines. The packs are fitted with high capacity dry cell batteries capable of delivering massive cranking power, making them ideal for maintenance operations such as fuel bleeding, oil pressure build-up, tail-lift cycling as well as frequent engine starting.
The Nato 200 is fitted with 2 x 45Ah dry cell batteries isolated by twin heavy-duty 1000A key switch isolators with dust covers. Both 12V and 24V outputs are protected against short circuit, or excessive engine cranking, by individual 750A fuses.
The Nato 200 has 2 x 2.3A, 3-stage internal chargers fitted ensuring both batteries are charged independently to maximise battery life. Each charger have a 3 coloured LED to indicate each stage of its charge cycle.
The standard 2m, 50mm2 highly flexible output cables allow the operator to safely connect to a flat battery within the engine bay whilst the pack remains on the floor.
The cables terminate with fully cast 1000A braided croc clips, ensuring an equal power delivery with minimal volts loss. The cables are detachable to allow for easy storage or replacement.
Optional accessories include bus plug (cowbell) lead sets, a powerful 24V inspection lamp and an ‘on board charge kit’ (OBCK) to allow the pack to be charged via any 12V vehicle cigarette/auxiliary socket. Longer lead sets are also available.
2m Croc Lead
240v Mains Lead
2m Cowbell/Bus Plug Lead
4m Cowbell/Bus Plug Lead
4m Croc Lead
On-board Charge Kit
Universal Trolley
Typical power plant*
Peak amps |
2450A | |
Nominal voltage | 12V / 24V DC | |
Standing voltage | 12.8V / 25.6V DC | |
Amp/hour capacity | 45 Ah @ 10hr rate (20°C) | |
Fuse rating | 750A | |
Operating temp | -40°C to +45°C (-40°F to 114°F) | |
Case | Powder coated mild steel | |
Automotive cable | 2m (6ft) lead set with 1000A croc clips | |
Charger | 2 x 12V 2.3A 3-stage / 100-260V AC/ 50-60Hz / single phase internal chargers /td> | |
Dimensions | H 435mm (17in), L 450mm (18in) x W 110mm (4in) | |
Weight | 33kg (72lb) |
If you would like to add optional extras to your quote, please select from the boxes below before clicking the 'Add to Quote' button.
Select any optional extras you would like to add to the quote: